Aluminum Wheel Polishing Machine steps

0 votes
asked May 14 by machineunique (900 points)

For this special process, we will use an Aluminum Wheel Polishing Machine . The machine is light in weight but high in strength. Next, your personal protective equipment is equally important. This includes ear protection, hand protection, eye protection and, most importantly, respiratory protection. After all, this is ready, you can work.

The first step is to place the product to be polished into an aluminum wheel polisher.

You can see that the machine divides the polished product into several parts. Start at the surface and walk to the edge. From left to right, from bottom to top, there is a good uniform pass. If you do not want to apply too much pressure, let the grinder rotate freely. Take some time to make sure you pass. Overlap each previous pass. Slowly move up and push the black composite line forward steadily. When you notice that the black line begins to fade, you need to remove all the old charred compounds from the mat, then reapply more compounds and repeat. This is the most important step in the polishing process. If this is correct, then you will really have the perfect mirror effect. The rest are downhill.

The second step begins again from the inside to the edge. Slowly you will feel that this will give you a near perfect ending. In the coloring phase, you will actually see this mirror forming. That is, the polishing effect.

In the final step, the check starts from the inside and then reaches the edge. If the form is an overall quality, it means that the completion is perfect.

information about aluminum wheel polishing machine : https://www.zhongyun-machine.com/product/wheel-polishing-machine/

Attach File
铝轮抛光机.jpg

Please log in or register to answer this question.

...